ONKYO DX-C390 Manual De Instruções

 

13

 

With 

 (Remote Interactive) you can control the 

DX-C390 together with your other 

-compatible 

Onkyo AV components. With some Onkyo AV receivers 
you can use one remote controller to control all your 
Onkyo components and use the following special 

 

functions:

 

■

 

If your DX-C390 is connected to an 

-compatible 

Onkyo AV receiver, when you turn on the DX-C390, the 
AV receiver will turn on and select the DX-C390 as the 
input source.

 

■

 

If your DX-C390 is connected to an 

-compatible 

Onkyo AV receiver, when you start playback on the 
DX-C390, the AV receiver will select the DX-C390 as 
the input source.

 

■

 

When you set an 

-compatible Onkyo AV receiver to 

Standby, all other AV components connected via 

 

enter Standby as well.

 

■

 

When you dim the display brightness on an 

-compat-

ible Onkyo AV component, the displays on all other AV 
components connected via 

 are dimmed as well.

To use the 

 functions, you need to connect one of the 

DX-C390’s 

 connectors to an 

 connector on 

another AV component in your system by using the sup-
plied  

cable. 

See the manuals supplied with your other 

-compati-

ble AV components for more information.

 

• Use only 

 cables for 

 connections.

•

 

• The DX-C390 has two 

 connectors. You can con-

nect either one to your Onkyo AV receiver. The other 
connector is for connecting additional 

-compatible 

components.

• Connect the DX-C390’s 

 connector to only Onkyo 

AV components. Connecting to other manufacturer’s 
AV components may cause them to malfunction.

• Some Onkyo 

-compatible AV components may 

not support the special functions described here.

RCA/phono audio connecting cable

 cable

Hi-fi amp, AV receiver

R

L

Coaxial cable (not supplied)

DX-C390_En.book Page 13 Wednesday, August 27, 2003 5:49 PM