ONKYO TX-NR801 Manual De Instruções

23

Connecting to Audio/Video Equipment—Continued

Using an RCA video connection cable, connect the 
video output jack (composite) of the device to the 
VIDEO 3 (or 4) VIDEO IN jack of the TX-NR801/
TX-NR801E. Or if the device has an S video output jack, 
connect it to the VIDEO 3 (or 4) S VIDEO IN jack of the 
TX-NR801/TX-NR801E using an S video connection 
cable. Or if the device has component video outputs, 
connect them to one of the banks of COMPONENT 
VIDEO INPUT jacks on the TX-NR801/TX-NR801E.

On the initial settings of the TX-NR801/TX-NR801E, 
the VIDEO 3 and 4 input sources are set for the 
COMPONENT VIDEO INPUT 2 jacks.
If you connect the device to the COMPONENT VIDEO 
INPUT 1 jacks, this must be changed at Setup Menu 

→ 

Input Setup 

→ Video Setup → Component Video (See 

page 38).
Using an RCA audio connection cable, connect the 
audio output jack of the device to the VIDEO 3 (or 4) 
AUDIO IN jacks of the TX-NR801/TX-NR801E. Make 
sure that you properly connect the left channel to the L 
jack and the right channel to the R jack.
When hooking up a TV with audio outputs, make sure 
the TV’s audio output setting. You might have to go 
through the TV’s menu and set the TV Fixed audio 
output and then internal speakers off.
If the device has a digital output, connect it to either the 
DIGITAL IN COAX jack or DIGITAL IN OPT jack of 
the TX-NR801/TX-NR801E, depending on the type of 
connector on the device.

On the initial settings of the TX-NR801/TX-NR801E, 
the VIDEO 3 input source is set for digital input at 
the OPT 3 jack.
If the digital connection is made at a different jack, this 
must be changed at Setup Menu 

→ Input Setup → 

Digital Setup (See page 36).
On the initial settings of the TX-NR801/TX-NR801E, 
the VIDEO 4 input source is not set for digital input. If 
you are connecting a digital component, these settings 
must be changed at Setup Menu 

→ Input Setup → 

Digital Setup (See page 36).

Using an RCA video connection cable, connect the 
video output jack (composite) of the device to the 
VIDEO 5 VIDEO jack of the TX-NR801/TX-NR801E. 
Or if the device has an S video output jack, connect it to 
the VIDEO 5 S VIDEO jack of the TX-NR801/
TX-NR801E using an S video connection cable.
Using an RCA audio connection cable, connect the 
audio output jack of the device to the VIDEO 5 AUDIO 
jacks of the TX-NR801/TX-NR801E. Make sure that 
you properly connect the left channel to the L jack and 
the right channel to the R jack.
If the device has an optical digital output, connect it to 
the VIDEO 5 DIGITAL jack of the TX-NR801/
TX-NR801E.

Using an RCA audio connection cable, connect the 
output jacks of the compact disc player to the CD 
AUDIO jacks of the TX-NR801/TX-NR801E. Make 
sure that you properly connect the left channel to the L 
jack and the right channel to the R jack.
If the compact disc player has a digital output, connect it 
to either the DIGITAL IN COAX jack or DIGITAL IN 
OPT jack of the TX-NR801/TX-NR801E, depending on 
the type of connector on the compact disc player.

On the initial settings of the TX-NR801/TX-NR801E, 
the CD input source is set for digital input at the OPT 
1 jack. 
If the digital connection is made to a different jack, this 
must be changed at Setup Menu 

→ Input Setup → 

Digital Setup (See page 36).