Elmo EDR-X04 Manual Do Utilizador

25

The E-Map function is used to lay out cameras on an electronic map. For example, if you have a drawing showing 
your building, you can position cameras on it in the locations in which cameras are actually installed. Then, in 
‘Live’ mode, you can select a camera from the E-Map, and the DVMS Server will display that camera alone. 
 

1. Click 

E-Map to activate the E-Map on 

the main screen. 

2.  Position No: Choose the position 

number where the E-map will appear. 

3. Click 

Find to select a bitmap to load as 

the E-Map. 

4. Click 

Go to copy the selected image to 

the drawing area. 

5. Go 

to 

Setting to set the positions of 

cameras, controls, and/or sensors: 

a. Select 

the 

Camera, then click the 

desired position for it on the E-
Map; 

b. Select 

the 

Control, then click the 

desired position for it on the E-
Map; 

c. Select 

the 

Sensor, then click the 

desired position for it on the E-
Map. 

6. Click 

Save to save the E-Map setup. 

1. Click 

the 

Sensor checkbox. 

2.  Click the camera, control, or sensor you 

wish to delete.