Samsung DVD-VR330 Manual De Instruções
English
- 21
C
onnections
Connecting HDMI/DVI to a
TV (DVD-VR335,VR336 only)
TV (DVD-VR335,VR336 only)
If your TV has a HDMI/DVI input, connect the HDMI/DVI
cable to the TV. You will enjoy the best quality images
and sounds.
cable to the TV. You will enjoy the best quality images
and sounds.
❚
Case 1 : Connecting to a TV with HDMI Jack
• Using the HDMI cable, connect the
HDMI OUT
jack
on the rear of the DVD Recorder & VCR to the
HDMI
IN
jack of your TV.
• Press the input selector on your TV remote control
until the HDMI signal from the DVD Recorder & VCR
appears on your TV screen.
appears on your TV screen.
❚
Case 2 : Connecting to a TV with DVI Jack
• Using the DVI Adapter Cable (not included), connect
the
HDMI OUT
jack on the rear of the DVD Recorder
& VCR to the
DVI IN
jack of your TV.
• Using the audio cables, connect the
AUDIO (red and
white) OUT
jacks on the rear of the DVD Recorder &
VCR to the
AUDIO (red and white) IN
jacks of your
TV. Turn on the DVD Recorder & VCR and TV.
• Press the input selector on your TV remote control until
the DVI signal from the DVD Recorder & VCR appears
on your TV screen.
on your TV screen.
To change HDMI output resolution, see page
34.
HDMI (High Definition Multimedia Interface)
HDMI is an interface to enable the digital
transmission of video and audio data with just
a single connector. Since HDMI is based on
DVI, it is completely compatible with DVI. The
only difference between HDMI and DVI is that
HDMI supports multi-channel audio.
Using HDMI, the DVD Recorder & VCR
transmits a digital video and audio signal and
displays a vivid picture on a TV having an
HDMI input jack.
transmission of video and audio data with just
a single connector. Since HDMI is based on
DVI, it is completely compatible with DVI. The
only difference between HDMI and DVI is that
HDMI supports multi-channel audio.
Using HDMI, the DVD Recorder & VCR
transmits a digital video and audio signal and
displays a vivid picture on a TV having an
HDMI input jack.
HDMI connection description
HDMI connector - Both uncompressed video
data and digital audio data (LPCM or Bit
Stream data).
data and digital audio data (LPCM or Bit
Stream data).
- Though the DVD Recorder & VCR uses a
HDMI cable, the DVD Recorder & VCR
outputs only a pure digital signal to the TV.
outputs only a pure digital signal to the TV.
- If TV does not support HDCP (High-band-
width Digital Content Protection), snow noise
appears on the screen.
appears on the screen.
Why does Samsung use HDMI?
Analog TVs require an analog video/audio
signal. However, when playing a DVD, the
data transmitted to a TV is digital. Therefore
either a digital-to-analog converter (in the DVD
Recorder & VCR) or an analog-to-digital
converter (in the TV) is required. During this
conversion, the picture quality is degraded due
to noise and signal loss. HDMI technology is
superior because it requires no D/A conversion
and is a pure digital signal from the DVD
Recorder & VCR to your TV.
signal. However, when playing a DVD, the
data transmitted to a TV is digital. Therefore
either a digital-to-analog converter (in the DVD
Recorder & VCR) or an analog-to-digital
converter (in the TV) is required. During this
conversion, the picture quality is degraded due
to noise and signal loss. HDMI technology is
superior because it requires no D/A conversion
and is a pure digital signal from the DVD
Recorder & VCR to your TV.
What is the HDCP?
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting DVD
content outputted via HDMI from being copied.
It provides a secure digital link between a
video source (PC, DVD, etc) and a display
device (TV, projector
Protection) is a system for protecting DVD
content outputted via HDMI from being copied.
It provides a secure digital link between a
video source (PC, DVD, etc) and a display
device (TV, projector
,
etc). Content is
encrypted at the source device to prevent
unauthorized copies from being made.
unauthorized copies from being made.
Note
To watch through the HDMI output, set the
digital audio output to PCM. (See page 32)
digital audio output to PCM. (See page 32)
Depending on the HDMI device (TV/HDMI
Receiver) you use, audio may not be supported.
If TV does not support Dolby digital/DTS, Audio
output is not available when you set Digital
output as Bitstream or select DTS On in Audio
setup menu. In this case, set the digital audio
output to PCM or DTS off.
Receiver) you use, audio may not be supported.
If TV does not support Dolby digital/DTS, Audio
output is not available when you set Digital
output as Bitstream or select DTS On in Audio
setup menu. In this case, set the digital audio
output to PCM or DTS off.
CAUTION
01010E-VR330/336-EUR-ENG1 2006.3.10 3:51 PM Page 21