Samsung DVD-VR330 Manual De Instruções
32 -
English
S
ystem Setup
Digital Output
•
PCM
:
Converts to PCM (2CH) 48kHz
audio. Select PCM when using the
Analog Audio Outputs.
audio. Select PCM when using the
Analog Audio Outputs.
•
Bitstream
:
Converts to Dolby Digital Bitstream.
Select Bitstream when using the
Digital Audio Output.
Select Bitstream when using the
Digital Audio Output.
DTS
•
Off
: Doesn’t output digital signal.
•
On
: Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Dynamic Compression
This is only active when a Dolby Digital signal is
detected.
•
detected.
•
On
: When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
•
Off
: You can enjoy the movie with the standard
Dynamic Range.
NICAM
NICAM programmes are divided into 3 types.
NICAM Stereo, NICAM Mono and Bilingual
(transmission in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select
the desired sound.
NICAM Stereo, NICAM Mono and Bilingual
(transmission in another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select
the desired sound.
•
On
: NICAM mode
•
Off
: Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
stereo sound is distorted due to inferior
reception conditions.
Setting Up the Audio
Options
Options
Allows you to setup the audio device and sound status
settings depending on the audio system in use.
You can also adjust the NICAM mode.
settings depending on the audio system in use.
You can also adjust the NICAM mode.
1
With the unit in Stop mode/No Disc mode, press
the
the
MENU
button.
2
Press the …† buttons to select
Setup
, then press
the
OK
or √ button.
3
Press the …† buttons to select
Audio
, then press
the
OK
or √ button.
Audio setup menu will be displayed.
4
Press the …† buttons to select the desired audio
option, then press the
option, then press the
OK
or √ button.
5
Press the …† buttons to select the desired item,
then press the
then press the
OK
or √ button.
Note
■
Press the
RETURN
or œ button to return to the
previous menu. Press the
MENU
button to exit
the menu.
Note
Note
When DTS soundtrack is played, sound is not
output from Analog Audio Output.
output from Analog Audio Output.
Be sure to select the correct Digital Output or
no audio will be heard.
no audio will be heard.
Setup
DVD-Recorder
No Disc
Programme
Setup
System
√
√
Clock Set
√
√
Language
√
√
Audio
√
√
Video
√
√
Parental Control
√
√
Install
√
√
Audio
DVD-Recorder
No Disc
Programme
Setup
Digital Output
: PCM
√
√
DTS
: Off
√
√
Dynamic Compressiom : On
√
√
NICAM
: On
√
√
RETURN
OK
MOVE
EXIT
RETURN
OK
MOVE
EXIT
01010E-VR330/336-EUR-ENG1 2006.3.16 6:28 PM Page 32