Samsung DVD-VR330 Manual De Instruções
42 -
English
P
layback
Playing a Disc
This DVD Recorder & VCR can only operate
with discs that are compatible with DVD-RAM
Standard Version 2.0.
with discs that are compatible with DVD-RAM
Standard Version 2.0.
Playback and/or recording may not work for
some types of discs, or when specific opera-
tions, such as angle change and aspect ratio
adjustment, are being performed. Information
about the discs is written in detail on the box.
Please refer to this if necessary.
some types of discs, or when specific opera-
tions, such as angle change and aspect ratio
adjustment, are being performed. Information
about the discs is written in detail on the box.
Please refer to this if necessary.
Do not allow the disc to become dirty or
scratched, fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for recording.
scratched, fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for recording.
DVD-RAM/-RW/-R discs may not be able to
play on some DVD players, depending on the
player, disc and the condition of the recording.
play on some DVD players, depending on the
player, disc and the condition of the recording.
Discs with NTSC programmes recorded on them
cannot be played and recorded using this product.
cannot be played and recorded using this product.
Note
Do not move your DVD Recorder & VCR while
playing, as this may cause damage to the disc.
playing, as this may cause damage to the disc.
Make sure to press the
OPEN/CLOSE
button to
open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a product
malfunction.
opened or closed, as this may cause a product
malfunction.
Do not place foreign materials on or in the disc
tray.
tray.
Some functions may perform differently or be
disabled depending on the disc type. If this
occurs, refer to the instructions written on the
disc case.
disabled depending on the disc type. If this
occurs, refer to the instructions written on the
disc case.
Be especially careful that children’s fingers are
not caught between the disc tray and the tray
chassis when it closes.
not caught between the disc tray and the tray
chassis when it closes.
After turning power on, it will take a few
seconds until the DVD Recorder & VCR oper-
ates.
seconds until the DVD Recorder & VCR oper-
ates.
CAUTION
1
Press the
OPEN/CLOSE
button.
2
Place a disc gently into the tray with the disc’s
label facing up.
label facing up.
3
Press
OPEN/CLOSE
button to close the disc tray.
• Your DVD Recorder & VCR closes the disc
tray and plays the disc automatically.
• The recorder does not play discs automatically
after being powered on initially.
• When the recorder is powered on and a disc is in
the tray, the unit will be activated and wait in stop
status. Press the
status. Press the
PLAY
button to start playback.
4
Press the
STOP
button to stop playback.
When you stop playing a disc, the DVD Recorder
& VCR remembers where you stopped, When you
press the
& VCR remembers where you stopped, When you
press the
PLAY
button again, it will pick up where
you left off. (unless the disc is removed or the
DVD Recorder & VCR is unplugged, or if you
press the
DVD Recorder & VCR is unplugged, or if you
press the
STOP
button twice.)
Note
01010E-VR330/336-EUR-ENG1 2006.3.13 5:27 PM Page 42