Samsung DVD-VR330 Manual De Instruções
40 -
English
S
ystem Setup
Canceling the progressive scan
1
In Stop mode, press the P.SCAN button on the
front of the DVD Recorder & VCR
front of the DVD Recorder & VCR
2
Press the œ √ buttons to select the
Yes
, and then
press the
OK
button.
3
Set your TV to Interlace input (using TV remote
control.)
control.)
No
Yes
Press [Yes] to confirm Interlace scan mode.
Otherwise, press [No].
Output selection (DVD-VR335,VR336 only)
• Connect the DVD Recorder & VCR to your TV via
HDMI or DVI. Set your TV's input to HDMI or DVI.
• Press the
P.SCAN
button while the unit is in Stop
mode to select the output resolution.
- If your TV is connected the HDMI or DVI cable,
- If your TV is connected the HDMI or DVI cable,
the output resolution mode changes in the follow-
ing sequence each time you press the
ing sequence each time you press the
P.SCAN
button:
→ 576p → 720p → 1080i
- If your TV is connected the AV or component
cables(without HDMI/DVI cable), the output resolu-
tion mode toggles 576p/576i in turn.
tion mode toggles 576p/576i in turn.
• HDMI/DVI cable does not support 576i. Video with
576i resolution can only be viewed through the analog
outputs (Composite/S-Video/Component).
outputs (Composite/S-Video/Component).
Even if HDMI/DVI cable is connected to your
TV, the AV connection outputs only 576i and
the component connection outputs only 576p
irrespective of the on-screen display.
the component connection outputs only 576p
irrespective of the on-screen display.
Progressive scan automatically activates when HDMI
is connected. (Please make sure PS is indicated
on the front panel of the DVD Recorder & VCR.)
on the front panel of the DVD Recorder & VCR.)
There will be no HDMI video and audio outputs
unless progressive scan function is activated.
Consult your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
If Progressive Scan is supported, follow the TV
User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
If Video Output is set incorrectly, the screen
may be blocked.
The resolutions available for HDMI/DVI output
depend on the connected TV or projector.
For details, see the user’s manual of your TV
or projector.
For details, see the user’s manual of your TV
or projector.
When the resolution is changed it may take a
few seconds for a normal image to appear.
If you set the HDMI output resolution 720p or
1080i, HDMI output provides better picture quality.
Note
01010E-VR330/336-EUR-ENG1 2006.3.14 11:15 AM Page 40