Copystar cs-1635 Guia Do Utilizador

The left cover of the cassette is open. Close the left 
cover as displayed in place of #.

Check the key counter and make sure it is set properly.

No Letter/A4 size paper was available in either the 
cassette or the Paper Feeder (MP tray) at the time when 
the report was attempted to be output. Press [Paper 
Selection] and select the supply cassette, then press 
[Start]. Paper will be supplied from the cassette 
selected.

–

Turn the power switch OFF/ON. Usage will be possible 
again once the regular display returns. When A and the 
number (A# # # #) are again displayed, make a note of 
the A and the number. Turn the power switch OFF, 
unplug the power cord and contact your service 
representative.

–

Copies cannot be produced because memory is full 
during the interrupt copy operation. Interrupt Copying 
cannot be carried out so press [Stop/Clear] and then 
press [Interrupt] again after the data read in has been 
deleted to exit the Interrupt Copying. 
After the copying operation for the interrupted copy has 
been completed, repeat the procedure again.

–

Memory is full.
Press [OK] to start outputting the copies read in. Press 
[Reset] or [Stop/Clear] to delete the data read in. 
Reduce the number of originals and repeat the copying 
procedure.

–

Check the MP Tray paper. Set paper in the MP Tray in 
the event there is no paper present there. When the MP 
Tray paper fails to be fed, reset the paper.

A paper misfeed has occurred. Remove the jammed 
paper.

The copier will try to make copies of the originals it could 
not copy before. Return all of the originals to the original 
table and try copying them again.

–

Close 

left cover #.

Insert 

key counter.

No matching

paper available.

MainPower Off/On

A####

Memory is full.

Cannot continue.

Memory is full.

Press OK.

MP tray empty.

Add paper.

Paper jam

Place the 

original on DP.