Copystar cs-1635 Guia Do Utilizador

The waste toner box is full. Replace it with a new waste 
toner box.

250 copies have been stored on output tray. Remove 
the paper, press [Start] and resume copying.

–

Originals were set in the optional Document Processor 
when copying on 2-sides (front and back sides), when 
copying from the platen in 2-Sided copy, 2 in 1, 4 in 1 or 
when collating copies. Remove the originals from the 
Document Processor, replace the originals on the 
Original Table after exiting the front and back copying, 2-
Sided copy, 2 in 1, 4 in 1 or Collate Mode and resume 
copying.

–

If the optional Document Processor is being used, there 
are originals left on the original table. Remove the 
originals, return them to the original table and try 
copying them again.

–

Check the paper cassette that corresponds to the 
lighting indicator. Set the cassette.

The Toner Container has not been set. Set the Toner 
Container.

The Add Toner indicator blinks on 
and off.

There is very little toner remaining. Copying can be 
continued for a short while before running out of toner. 
Replace the toner container with a new one as soon as 
possible.

The Periodic Maintenance 
indicator blinks on and off.

This is a notification that the time for periodic 
maintenance is approaching.

–

The Periodic Maintenance 
indicator lights up.

It is time for Periodic Maintenance. Contact your service 
representative.

–

“= = =” appears on the copy 
quantity display.

Job Accounting being set. Use the numeric keys to enter 
the assigned Section Code to perform copying 
operations. Press [Job Accounting] after copying is 
finished to display “= = =” again.

“-” appears on the copy quantity 
display.

The copier is in the Sleep Mode setting. Press [Energy 
saver] to exit the mode.

Replace waste

toner box.

Remove paper on

top tray; Start.

Reseat originals

on DP.

Return all

originals to DP.

Set paper 

cassette.

Set toner

container.