Manualsbrain.com
  1. Manuais
  2. Marcas
  3. KitchenAid
  4. 24" Double Wall Oven with True Convection
  5. Guia Da Instalação

KitchenAid 24" Double Wall Oven with True Convection Guia Da Instalação

Download
Página de 16
5
Make Electrical Connection
The oven is manufactured with a neutral (white) power supply 
wire and a cabinet-connected green (or bare) ground wire 
twisted together.
1.   Disconnect  power.
2.   Feed the flexible conduit from the oven through the opening 
in the cabinet.
3.  Remove junction box cover if it is present.
4.   Install a UL-listed or CSA-approved conduit connector  
to the junction box.
5.   Route the flexible conduit from the oven to the junction box 
through a UL-listed or CSA-approved conduit connector.
6.  Tighten screws on conduit connector.
7.   See “Electrical Connection Options Chart” to complete 
installation for your type of electrical connection.
A. UL-listed or CSA-approved conduit connector
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Use 8 gauge solid copper wire.
Electrically ground oven.
Failure to follow these instructions can result in death, 
fire, or electrical shock.
A
Electrical Connection Options Chart
If your home has:
Go to section:
4-wire
            
½"
(1.3 cm)
4-Wire Cable from Home
Power Supply
3-wire
            
½"
(1.3 cm)
3-Wire Cable from Home
Power Supply
4-Wire Cable from Home Power Supply
IMPORTANT: Use the 4-wire cable from home power supply  
in the U.S. where local codes do not allow grounding through 
neutral, New Branch circuit installations (1996 NEC), mobile 
homes and recreational vehicles, new construction and in 
Canada.
A. Cable from home power supply
B. Black wires
C. Red wires
D. 4-wire flexible cable from oven
E. Junction box
 F. White wires
G. UL-listed wire connectors
H. Green (or bare) ground wires
 I.  UL-listed or CSA-approved 
conduit connector
1.   Connect the 2 black wires (B) together using a UL-listed wire 
connector.
2.   Connect the 2 red wires (C) together using a UL-listed wire 
connector.
3.   Untwist white wire from green (or bare) ground wire coming 
from the oven.
4.   Connect the 2 white wires (F) together using a UL-listed wire 
connector.
5.   Connect the green (or bare) ground wire (H) from the oven 
cable to the green (or bare) ground wire (in the junction box) 
using a UL-listed wire connector.
6.  Install junction box cover.
A
D
F
H
B
C
E
G
I
 3.   Grasp the edges of the oven door with both hands and close 
the oven door until it will no longer close. Lift and pull oven 
door toward you and remove. Set the oven door aside on  
a covered work surface.