KitchenAid 24" Double Wall Oven with True Convection Guia Da Instalação
6
Install Oven
2. Push against seal area of front frame to push oven
into cabinet.
3. Push oven completely into cabinet and center oven
into cabinet cutout.
4. Securely fasten oven to cabinet using the # 8-14 x 1" screws
(2 for single oven, 4 for double oven) provided. Insert the
screws through holes in mounting rails. Do not overtighten
screws.
3-Wire Cable from Home Power Supply – U.S. Only
IMPORTANT: Use the 3-wire cable from home power supply
where local codes permit a 3-wire connection.
A. Cable from home power supply
B. Junction box
C. Black wires
D. White wires
E. Green (or bare) ground wire
(from oven)
F. 4-wire flexible cable from
oven
G. Red wires
H. UL-listed wire connectors
I. UL-listed or CSA-approved
conduit connector
1. Connect the 2 black wires (C) together using a UL-listed wire
connector.
2. Connect the 2 white wires (D) and the green (or bare) ground
wire (of the oven cable) using a UL-listed wire connector.
3. Connect the 2 red wires (G) together using a UL-listed wire
connector.
4. Install junction box cover.
B
C
D
E
F
H
G
A
I
NOTE: Remove side and vent trims taped to oven before
installing.
1. Using 2 or more people, lift oven partially into cabinet
1. Using 2 or more people, lift oven partially into cabinet
cutout. Use the oven opening as an area to grip.
NOTE: Push against seal area of oven front frame when
NOTE: Push against seal area of oven front frame when
pushing oven into cabinet. Do not push against outside
edges.
A
A. Shipping foot
A
A. # 8–14 x 1" screws
5. See the following instructions to install.
■
Insert the vent tabs (B) into slots (A) in the oven frame.
■
With one # 8-18 x ³⁄
8
" screw (C) for each side of the vent,
fasten vent securely to the oven.
A
B
C
D
A. Oven frame slot
B. Vent tab
C. # 8-18 x ³⁄
8
" screw
D. Oven vent