Netgear UTM9S – ProSECURE Unified Threat Management (UTM) Appliance with DSL and Wireless modules Manual De Referência
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Manually Configuring Internet and WAN Settings
67
ProSecure Unified Threat Management (UTM) Appliance
Internet and WAN Configuration Tasks
Note:
For information about configuring the DSL interface of the UTM9S,
see
. The information in
this chapter does also apply to the WAN interfaces of the UTM9S.
Generally, five steps are required to complete the WAN Internet connection of your UTM.
Complete these steps:
1.
Configure the Internet connections to your ISPs. During this phase, you connect to
your ISPs. See
your ISPs. See
2.
Configure the WAN mode (required for multiple WAN port models). For all models,
select either NAT or classical routing. For the multiple WAN port models, select dedicated
(single WAN) mode, auto-rollover mode, or load balancing mode. For load balancing, you
can also select any necessary protocol bindings. See
select either NAT or classical routing. For the multiple WAN port models, select dedicated
(single WAN) mode, auto-rollover mode, or load balancing mode. For load balancing, you
can also select any necessary protocol bindings. See
3.
Configure secondary WAN addresses on the WAN ports (optional). Configure aliases
for each WAN port. See
for each WAN port. See
4.
Configure Dynamic DNS on the WAN ports (optional). Configure your fully qualified
domain names during this phase (if required). See
domain names during this phase (if required). See
5.
Configure the WAN options (optional). Optionally, you can enable each WAN port to
respond to a ping, and you can change the factory default MTU size and port speed.
However, these are advanced features, and changing them is not usually required. See
respond to a ping, and you can change the factory default MTU size and port speed.
However, these are advanced features, and changing them is not usually required. See
Each of these tasks is detailed separately in this chapter.
Note:
For information about how to configure the WAN meters, see
Automatically Detecting and Connecting the Internet
Connections
Connections
To set up your UTM for secure Internet connections, the web management interface provides
the option to automatically detect the network connections and configure the WAN port or
ports. You can also manually configure the Internet connections and ports (see
the option to automatically detect the network connections and configure the WAN port or
ports. You can also manually configure the Internet connections and ports (see