Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

 field, type a valid MAC address to be bound to a VLAN ID. 

This field is configurable only when a MAC-based VLAN is created.

In the VLAN ID field, specify a VLAN ID in the range of 1 to 4093.

Take one of the following actions:

To add the add a MAC address to the VLAN mapping, click the Add button.

To delete a MAC address from VLAN mapping, click the Delete button.

You can use a protocol-based VLAN to define filtering criteria for untagged packets. By 
default, if you do not configure any port-based (IEEE 802.1Q) or protocol-based VLANs, 
untagged packets are assigned to VLAN 1. You can override this behavior by defining either 
port-based VLANs or protocol-based VLANs, or both. Tagged packets are always handled 
according to the IEEE 802.1Q standard, and are not included in protocol-based VLANs.

If you assign a port to a protocol-based VLAN for a specific protocol, untagged frames 
received on that port for that protocol are assigned the protocol-based VLAN ID. Untagged 
frames received on the port for other protocols are assigned the Port VLAN ID, either the 
default PVID (1) or a PVID you specifically assigned to the port using the Port VLAN 
Configuration page.

You define a protocol-based VLAN by creating a group. Each group has a one-to-one 
relationship with a VLAN ID, can include one to three protocol definitions, and can include 
multiple ports. When you create a group, you specify a name and a group ID is assigned 
automatically.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.