Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Switching

> VLAN > Advanced > Protocol Based VLAN Group Membership. 

In the Group ID list, select the protocol-based VLAN group ID.

Select port numbers (1, 2, 3, and so on) to select ports to add to this protocol-based VLAN 

group.

An interface can belong to only one group for a given protocol. If you already added a 

port to a group for IP, you cannot add it to another group that also includes IP, although 
you can add it to a new group for IPX.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table describes the nonconfigurable information displayed on the page.

IP subnet-to-VLAN mapping is defined by configuring an entry in the IP Subnet to VLAN 
table. An entry is specified through a source IP address, network mask, and the desired 
VLAN ID. The IP subnet-to-VLAN configurations are shared across all ports of the device.

Group Name

This field identifies the name for the protocol-based VLAN that you 
selected. It can be up to 32 alphanumeric characters long, including 
blanks.

Current Members

This button can be click to show the current numbers in the selected 
protocol-based VLAN group.