Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Select Switching

> VLAN > Advanced > Protocol Based VLAN Group Configuration. 

In the Group Name field, type a name for the new group. 

You can enter up to 16 characters.

In the Protocol field, select the protocols to be associated with the group. 

There are three configurable protocols:

. IP is a network layer protocol that provides a connectionless service for the 

delivery of data.

. Address Resolution Protocol (ARP) is a low-level protocol that dynamically 

maps network layer addresses to physical medium access control (MAC) addresses.

. The internetwork packet exchange (IPX) is a connectionless datagram 

network-layer protocol that forwards data over a network.

In the VLAN ID field, select the VLAN ID. 

It can be any number in the range of 1 to 4093. All the ports in the group assigns this 
VLAN ID to untagged packets received for the protocols that you included in this group.

Click the Add button.

The protocol-based VLAN group is added to the switch.

The following table describes the nonconfigurable information displayed on the page.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

Group ID

A number used to identify the group created by the user. Group IDs are 

automatically assigned when a group is created by the user.

Ports

Display all the member ports that belong to the group.