Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Routing
321
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable information displayed on the page.
Configure RIP
Enable RIP
To enable RIP:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > RIP > Basic > RIP Configuration.
6.
In the RIP Admin Mode field, select the Enable or Disable option.
If you select Enable, RIP is activated for the switch. The default is Enable.
7.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Table 119. ARP Table Configuration
Field
Description
Total Entry Count
Total number of entries in the ARP table.
Peak Total Entries
Highest value reached by Total Entry Count. This counter value is
restarted whenever the ARP table Cache Size value is changed.
restarted whenever the ARP table Cache Size value is changed.
Active Static Entries
Total number of active static entries in the ARP table.
Configured Static Entries
Total number of configured static entries in the ARP table.
Maximum Static Entries
Maximum number of static entries that can be defined.