Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Routing > RIP > Advanced > RIP Configuration. 

Select the RIP Admin Mode Disable or Enable radio button. 

If you select Enable, RIP is activated for the switch. By default, RIP is enabled. 

Select a Split Horizon Mode radio button:

. No special processing for this case.

. A route is not included in updates sent to the router from which it was 

learned. The default is Simple.

. A route is included in updates sent to the router from which it was 

learned, but the metric is set to infinity. 

Split horizon is a technique for avoiding problems caused by including routes in updates 
sent to the router from which the route was originally learned

In the Auto Summary Mode field, select the Enable or Disable option. 

If you select Enable, groups of adjacent routes are summarized into single entries reduce 
the total number of entries. The default is Disable.