Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Routing
323
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
9.
In the Host Routes Accept Mode field, select the Enable or Disable option.
If you select Enable, the router accepts host routes. The default is Enable.
10.
In the Default Information Originate field, select to Enable or Disable default route
advertisement.
11.
In the Default Metric field, specify a default value for the metric of redistributed routes.
This field displays the default metric if one has already been set, or 0 if one was not
configured earlier. The valid values are 1 to 15.
configured earlier. The valid values are 1 to 15.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
Configure Advanced RIP Interface Settings
To configure advanced RIP interface settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > RIP > Advanced > Interface Configuration.
Table 120. RIP Advanced Configuration
Field
Description
Global Route Changes
The number of route changes made to the IP route database by RIP.
This does not include the refresh of a route's age.
This does not include the refresh of a route's age.
Global Queries
The number of responses sent to RIP queries from other systems.