Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Security > Control > IPv6 Source Guard > Interface Configuration.

Use one of the following methods to select an interface:

In the Go To Interface field, enter the interface in the unit/slot/port format and click on 
the Go button.

Next to the Interface column, select the check box for the port that you want to 
configure, select multiple check boxes to apply the same setting to all selected 
interfaces, or select the check box in the table heading to apply the same settings to 
all interfaces.

Use the IPv6SG Mode menu to enable or disable validation of sender IPv6 address on this 

interface.

If IPv6SG is enabled, packets are not forwarded if the sender IPv6 address is not in the 
DHCP snooping binding database. The factory default is Disable.

Use the IPv6SG Port Security menu to enable or disable the IPv6SG port security on the 

selected interface. 

IP Address

Displays valid IP address for the binding entry.

Filter Type

Filter type used on the interface. One is source IP address filter type, 
and the other is source IP address and MAC address filter type.