Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
565
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
9.
In the IPv6 Address field, specify valid IP address for the binding rule.
10.
Click the Add button.
The IPv6SG static binding entry is added to the database.
The following table describes the nonconfigurable IPv6 Source Guard dynamic binding
configuration information that is displayed.
configuration information that is displayed.
Configure Dynamic ARP Inspection
You can configure dynamic ARP inspection (DAI) VLANs, interfaces, and ACL with
associated rules.
associated rules.
Configure the Global Dynamic ARP inspection Settings
You can configure the global dynamic ARP inspection (DAI) settings.
To configure the global DAI settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Control > Dynamic ARP Inspection > DAI Configuration.
Table 208. IPv6 Source Guard Dynamic Binding Configuration
Field
Description
Interface
The interface to add a binding into the IPSG database.
MAC Address
The MAC address for the binding entry.
VLAN ID
The VLAN for the binding entry.
IPv6 Address
Displays valid IPv6 address for the binding entry.
Filter Type
Filter type used on the interface. One is source IPv6 address filter type,
and the other is source IPv6 address and MAC address filter type.
and the other is source IPv6 address and MAC address filter type.