Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
564
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
If IPv6SG port security is enabled, then the packets are not forwarded if the sender MAC
address is not in FDB table and it is not in the DHCP snooping binding database. To
enforce filtering based on MAC address other required configurations are as follows:
address is not in FDB table and it is not in the DHCP snooping binding database. To
enforce filtering based on MAC address other required configurations are as follows:
•
Enable port-security globally.
•
Enable port-security on the interface level.
IPv6SG port security cannot be enabled if IPv6SG is disabled. The factory default is
Disable. Also, you are not allowed to turn off IPv6SG port security while IPv6SG is
enabled.
Disable. Also, you are not allowed to turn off IPv6SG port security while IPv6SG is
enabled.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure an IPv6 Source Guard Binding
To configure an IPv6 source guard static binding:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Control > IPv6 Source Guard > Binding Configuration.
6.
From the Interface menu, select the interface to add a binding into the IPv6SG database.
7.
In the MAC Address field, specify the MAC address for the binding.
8.
From the VLAN ID menu, select the VLAN from the list for the binding rule.