Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Manual Do Equipamento
16
|
Chapter 2. Physical Description
GS728TS, GS728TPS, GS752TS, and GS752TPS Smart Switch Hardware Installation Guide
GS752TPS Front-Panel and Back-Panel Configuration
The GS752TPS Smart Switch has 48 10/100/1000 Mbps PoE capable copper ports and 6
SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (port 51 and 52) at a time
can be used as stacking ports.
SFP fiber ports, 2 of which are combo ports. Up to two SFP ports (port 51 and 52) at a time
can be used as stacking ports.
Each port is capable of sensing the line speed and negotiating the duplex mode with the link
partner automatically.
partner automatically.
illustrates the front panel of the NETGEAR GS752TPS Smart Switch.
Power, Fan, LED mode, PoE Max,
Link/Speed/ACT LEDs
10/100/1000M PoE capable Ethernet Ports
Combo and Dedicated
SFP Ports
Reset Button
and Stack Master LEDs
Factory
Defaults Button
Stack ID LED
Select Button
Figure 8. GS752TPS Front Panel
The front panel contains the following:
•
48 RJ-45 connectors for 10/100/1000 Mbps autosensing Gigabit Ethernet switching ports.
•
2 Combo ports (port 47 and 48) to support 10/100/1000 Mbps copper or 100M/1G optical
module.
module.
•
2 dedicated SFP ports (port 49 and 50) to support 1G optical module.
•
2 dedicated SFP ports (port 51 and 52) to support 1G optical module (uplink) or 2.5G
stacking (via stacking cable).
•
Up to two of these ports (ports 51 and 52) can alternatively be used as stacking ports
•
Reset button to restart the device.
•
Select button to change the working mode of the port LEDs with either PoE Mode or
Ethernet Mode.
•
Recessed default reset button to restore the device back to the factory defaults
•
Link, Speed, and Activity LEDs for each port.
•
Power, Fan Status, Stack Master, LED mode, PoE Max, and Stack ID LEDs.
illustrates the NETGEAR GS752TPS Smart Switch back panel.