Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa
292
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
Troubleshooting
The Troubleshooting menu contains links to the following options:
Ping
Use the Ping page to tell the switch to send a Ping request to a specified IP address. You can
use this feature to check whether the switch can communicate with a particular network host.
use this feature to check whether the switch can communicate with a particular network host.
To access the Ping page, click Maintenance > Troubleshooting > Ping.
To configure the settings and ping a host on the network:
1.
In the Hostname/IP Address field, specify the IP address or the hostname of the station
you want the switch to ping. The initial value is blank. This information is not retained
across a power cycle.
you want the switch to ping. The initial value is blank. This information is not retained
across a power cycle.
2.
Optionally, configure the following settings:
•
Count. Specify the number of pings to send. The valid range is 1–15.
•
Interval. Specify the number of seconds between pings sent. The valid range is 1–60.
•
Size. Specify the size of the ping (ICMP) packet to send. The valid range is 0–65507.
3.
Click Cancel to cancel the operation on the screen and reset the data on the screen to the
latest value of the switch.
latest value of the switch.