Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Guia Do Administrador

In the USB File field, specify the path and filename for the file you want to download. You 
may enter up to 32 characters. The default is blank.

Do not overwrite the active image. If you attempt to do this, the 
system will display a warning.

Click the Apply button.The file transfer begins.

The last row of the table displays non-configurable information about the progress of the file 
transfer. This information is displayed only after the file transfer process starts.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.

The system maintains two versions of the switch software in permanent storage. One image 
is the active image, and the second image is the backup image. The active image is loaded 
during subsequent switch restarts. This feature reduces switch down time when upgrading or 
downgrading the switch software.

A legacy software version will ignore (not load) a configuration file created that is created by a 

newer software version. When a configuration file created by the newer software version is 
discovered by the system running an older version of the software, the system displays an 
appropriate warning to the user.

The File Management menu contains links to the features described in the following sections.

Use the Copy screen to copy an image from one location (primary or backup) to another. 



Select Maintenance > File Management > Copy.

Next to Source Image, select image1 or image2 as the source image to copy to the 
destination.

Next to Destination Image, select the image to overwrite.

Next to Stack Member, select the member unit ID to copy.

Click the Apply button.