Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Manual De Referência
Virtual Private Networking Using IPSec and L2TP Connections
279
NETGEAR ProSAFE VPN Firewall FVS318G v2
To configure DPD on a configured IKE policy:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.
2.
Select VPN > IPSec VPN.
The IPSec VPN submenu tabs display with the IKE Policies screen for IPv4 in view.
3.
Specify the IP version for which you want to edit an IKE policy:
•
IPv4. In the upper right of the screen, the IPv4 radio button is already selected by
default. Go to
default. Go to
.
•
IPv6. Select the IPv6 radio button.
The IKE Policies screen for IPv6 displays.
4.
In the List of IKE Policies table, to the right of the IKE policy that you want to edit, click the
Edit table button.