Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Manual De Referência

The VPN Policies screen displays.

Specify the IP version for which you want to edit a VPN policy:

IPv4. In the upper right of the screen, the IPv4 radio button is already selected by 
default. Go to 

.

IPv6. Select the IPv6 radio button. 

The VPN Policies screen for IPv6 displays.

In the List of VPN Policies table, to the right of the VPN policy that you want to edit, click the 

Edit table button. 

Select the Enable NetBIOS? check box.

Click the Apply button.

Your changes are saved.

As an alternate solution to IPSec VPN tunnels, you can configure a Layer 2 Tunneling 
Protocol (L2TP) server on the VPN firewall to allow users to access L2TP clients over L2TP 
tunnels. A maximum of 25 simultaneous L2TP user sessions are supported. (The very first IP 
address of the L2TP address pool is used for distribution to the VPN firewall.) 

An L2TP Access Concentrator (LAC) typically initiates a tunnel to fulfill a connection request 
from an L2TP user; the L2TP server accommodates the tunnel request. After an L2TP tunnel 
is established, the L2TP user can connect to an L2TP client that is located behind the VPN 
firewall.

IPSec VPN provides stronger authentication and encryption than L2TP. (Packets that 
traverse the L2TP tunnel are not encapsulated by IPSec.)

You must enable the L2TP server on the VPN firewall, specify an L2TP server address pool, 
and create L2TP user accounts. (L2TP users are authenticated through local authentication