Xerox DocuColor 12 Printer with Fiery X12 Guia Da Instalação
1
1-2
Connecting to the Network
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
successful installation are:
•
Physically connecting the Fiery to a functioning network
Prepare a network node for the Fiery—obtain cable and route it to the location
where the Fiery will be installed (near the copier) and attach the cable to the network
interface of the Fiery. See page 2-10 for details.
where the Fiery will be installed (near the copier) and attach the cable to the network
interface of the Fiery. See page 2-10 for details.
N
OTE
:
If you plan to run the Command WorkStation software from a remote
computer, you will need to install the software and connect the Command
WorkStation computer to the network along with the Fiery. See
WorkStation computer to the network along with the Fiery. See
Getting Started
for details.
•
Configuring the network server
When network servers are required, you need to configure those servers to provide
client access to the Fiery as a color PCL or PostScript printer. See Chapter 5 for
information on configuring network servers in Windows and UNIX network
environments.
client access to the Fiery as a color PCL or PostScript printer. See Chapter 5 for
information on configuring network servers in Windows and UNIX network
environments.
•
Setting up the Fiery
Configure the Fiery for your particular printing and network environment. First
read Chapter 2, and then see the following chapters for details.
read Chapter 2, and then see the following chapters for details.
•
Preparing client workstations for printing
Install the files needed for printing, install additional user software, and connect the
client to the Fiery over the network. These steps are described in Getting Started, and
some information is provided in Chapter 5 of this manual.
client to the Fiery over the network. These steps are described in Getting Started, and
some information is provided in Chapter 5 of this manual.
•
Administering the Fiery
Monitor and maintain system performance and troubleshoot problems that arise.
See Chapter 6 and the Job Management Guide for details.
See Chapter 6 and the Job Management Guide for details.