Philips AVENT SCF 870/22 Manual Do Utilizador

 11 

 Leave the lid of the filling opening open to prevent bacterial growth.

 - Do not throw away the appliance with the normal household waste at the end of its life, but 

hand it in at an official collection point for recycling. By doing this, you help to preserve the 

environment (Fig. 25).

 1 

 Empty the water tank before you store the appliance (Fig. 24).

 2 

 Make sure all parts are clean and dry before you store the appliance (see chapter ‘Cleaning’).

 3 

 Store the appliance with the blade unit in the jar to prevent damage.

 4 

 Do not place the lid on the jar and leave the lid of the filling opening open to avoid bacterial 

growth.

If you need service or information or if you have a problem, please visit the Philips AVENT website 

at www.philips.com/AVENT or contact the Philips Consumer Care Centre in your country 

(you find its phone number in the worldwide guarantee leaflet). If there is no Consumer Care 

Centre in your country, go to your local Philips dealer.

This chapter summarises the most common problems you could encounter with the appliance. If 

you are unable to solve the problem with the information below, contact the Consumer Care 

Centre in your country. 

Problem

Possible cause

Solution

The appliance 

does not work.

The appliance is 

equipped with a safety 

lock. If the parts have 

not been assembled 

properly onto the 

motor unit, the 

appliance does not 

work.

Assemble all parts properly. See chapter ‘Using the 

appliance’.

The steaming light 

does not go on.

The appliance is not 

connected to the 

mains.

Put the plug in the wall socket.

The jar is not properly 

placed on the motor 

unit.

Place the jar properly on the motor unit.

You want to start a 

second steaming 

process just after one 

has finished.

Switch off the appliance and allow it to cool down 

for a few minutes before you start a second 

steaming process.

14