Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter Guia Do Desenho
10-18
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Guest Access Configuration
Note
If DHCP services are to be implemented locally on the anchor controller, populate the primary DHCP
server field with the management IP address of the controller. See
server field with the management IP address of the controller. See
If guest N+1 redundancy is being implemented in the DMZ, repeat the above interface configuration for
each additional anchor WLC being deployed.
each additional anchor WLC being deployed.
Mobility Group Configuration
The following default mobility group parameters should already be defined on the foreign WLC(s) as
part of a standard centralized WLAN deployment. To support auto-anchor mobility for guest access, the
anchor WLC(s) must also be configured with a mobility group domain name.
part of a standard centralized WLAN deployment. To support auto-anchor mobility for guest access, the
anchor WLC(s) must also be configured with a mobility group domain name.
Defining the Default Mobility Domain Name for the Anchor WLC
Configure a default mobility domain name for the anchor WLC. The anchor's mobility domain name
should be different than what is configured for the foreign WLCs. In the examples below, the WLCs
(foreign controllers) associated with the enterprise wireless deployment are all members of mobility
group 'SRND'. The guest anchor WLC on the other hand, is configured with a different mobility group
name: “ANC”. This is done to keep the anchor WLC logically separate from the primary mobility domain
associated with the enterprise wireless deployment.
should be different than what is configured for the foreign WLCs. In the examples below, the WLCs
(foreign controllers) associated with the enterprise wireless deployment are all members of mobility
group 'SRND'. The guest anchor WLC on the other hand, is configured with a different mobility group
name: “ANC”. This is done to keep the anchor WLC logically separate from the primary mobility domain
associated with the enterprise wireless deployment.
Step 1
Click the Controller tab.
Step 2
Enter a name in the Default Mobility Domain Name field.
Step 3
Click Apply. (See
Figure 10-11
Defining a Default Mobility Domain Name on the Anchor WLC