Cisco Cisco Aironet 350 Mini-PCI Wireless LAN Client Adapter Guia Do Desenho
10-19
Enterprise Mobility 4.1 Design Guide
OL-14435-01
Chapter 10 Cisco Unified Wireless Guest Access Services
Guest Access Configuration
Defining Mobility Group Members of the Anchor WLC
Every foreign WLC within the enterprise deployment that is going to support the guest WLAN must be
defined as a mobility group member in the guest anchor WLC(s).
defined as a mobility group member in the guest anchor WLC(s).
Step 1
Click the Controller tab.
Step 2
In the left pane, click Mobility Management and then Mobility Groups. (See
.)
Figure 10-12
Defining Mobility Group Members
Adding Foreign Controllers as Mobility Group Members
Step 3
Click New to define a MAC and IP address for each foreign controller that will support the guest access
WLAN. (See
WLAN. (See
Figure 10-13
Adding Foreign Controllers to Anchor WLC
Note
The 'Group Name' in
above is the name configured under the foreign WLC's ‘Default
Mobility Domain Name’, which should be different than the name used by the anchor WLC.The member
IP and MAC address are those addresses associated with the management interface of the foreign WLCs.
Repeat the above steps for each additional foreign WLC that will support the guest WLAN. If more than
one anchor is being deployed (guest N+1 redundancy), then repeat the steps in
IP and MAC address are those addresses associated with the management interface of the foreign WLCs.
Repeat the above steps for each additional foreign WLC that will support the guest WLAN. If more than
one anchor is being deployed (guest N+1 redundancy), then repeat the steps in
and