Cisco Cisco Gigabit Ethernet Switch Module (CGESM) for HP
15
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes, Cisco IOS Release 12.2(52)SE
515765-003
Documentation Updates
•
CSCta78502
When you have configured a login banner by entering the banner login c message c global
configuration command and the switch reloads, the output of banner is missing a carriage return,
making the format incorrect.
configuration command and the switch reloads, the output of banner is missing a carriage return,
making the format incorrect.
There is no workaround.
•
CSCtb97439
When remote neighbors change, the LLDP MIB does not properly update the remote neighbors.
The workaround is to clear the LLDP table by entering the clear lldp table privileged EXEC
command.
command.
Documentation Updates
Update to the Software Configuration Guide
This text was updated in the “Using IEEE 802.1x Authentication with Guest VLAN section of the
software configuration guide:
software configuration guide:
If the switch is trying to authorize an IEEE 802.1x-capable voice device and the AAA server is
unavailable, the authorization attempt fails, but the detection of the EAPOL packet is saved in the
EAPOL history. When the AAA server becomes available, the switch authorizes the voice device.
However, the switch no longer allows other devices access to the guest VLAN. To prevent this situation,
use one of these command sequences:
unavailable, the authorization attempt fails, but the detection of the EAPOL packet is saved in the
EAPOL history. When the AAA server becomes available, the switch authorizes the voice device.
However, the switch no longer allows other devices access to the guest VLAN. To prevent this situation,
use one of these command sequences:
•
Enter the dot1x guest-vlan supplicant global configuration command to allow access to the guest
VLAN.
VLAN.
•
Enter the shutdown interface configuration command followed by the no shutdown interface
configuration command to restart the port.
configuration command to restart the port.
Related Documentation
These documents provide complete information about the switch and are available from the HP web site:
•
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Release Notes
(part number 383623-001)
(part number 383623-001)
•
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Software Configuration Guide
(part number 380261-001)
(part number 380261-001)
•
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class System Message Guide
(part number 380260-001)
(part number 380260-001)
•
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Hardware Installation Guide
(part number 380264-001)
(part number 380264-001)
•
Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Quick Setup Instructions
(part number 380263-001)
(part number 380263-001)
•
Cisco Small Form-Factor Pluggable Modules Installation Instructions (part number 380-263-001)