Cisco Cisco ONS 15600 SDH Multiservice Provisioning Platform (MSPP) Guia Da Instalação

Grant always—Installs the public-key certificate and does not delete it after the session is over. 
Cisco recommends this option.

View Certificate—Allows you to view the public-key security certificate.

Return to your originating procedure (NTP).

If CTC is not already running, start CTC.

In node view, click the Maintenance tab and then click the Software button.

Click the Accept button. The acceptance process will take approximately 2 to 5 minutes.

You can reject the new software load by clicking the Cancel button. 

If the Cancel button is not active, the standby TSC has not finished acquiring the active timing 
reference. The acquire process can take approximately 10 to 15 minutes. When the acquire 
process completes, the Cancel button becomes active.

On the Maintenance tab, click the Software button and verify the version:

Click the Info button.

In the Current Software Info dialog box, verify that the TSC B Working field shows the correct 
version. The TSC B Protect field should show the previous version. 

If the TSC B Working and TSC B Protect fields show none, click OK and click the Info button again 
after several minutes. Repeat until the TSC B software versions appear.

Click OK.

Back up Software 8.0 using the 

, substituting Software R9.0 for Software R8.0.

Return to your originating procedure (NTP).

This task upgrades the standby TSC card.

PC or UNIX workstation

Required

Onsite or remote (but in the presence of the workstation)

Superuser