Cisco Cisco ONS 15454 SDH Multiservice Provisioning Platform (MSPP) Guia Da Instalação

The tasks to revert to a previous load are not a part of the upgrade. They are provided here as a 
convenience to those wishing to perform a revert after an upgrade. If you have performed all necessary 
procedures up to this point, you have finished the software upgrade.

Before you upgraded to Software R4.1.x, you should have backed up the existing database at all nodes 
in the network (this is part of the 

Cisco recommends that you record or export all critical information to your hard drive. If you need to 
revert to the backup database, use the following tasks, in order. 

Log into the node. For detailed instructions, refer to the Cisco ONS 15454 SDH Procedure Guide. If you 
are already logged in, continue with Step 

Complete the 

 (MS-SPRing only).

Complete the 

Complete the 

 (MS-SPRing only).

If the software revert to your previous release failed, complete the 

.

This procedure returns you to the software and database provisioning you 
had before you activated Software R4.1.x.

PC or UNIX workstation

NTP-U48 Prepare for Release 4.x to Release 4.1.x Upgrade, page 3
NTP-U63 Back Up the Software R4.x Database, page 5
NTP-U64 Upgrade Software R4.x to Software R4.1.x, page 7

As needed

Onsite or remote (but in the presence of the workstation)

Superuser