Cisco Cisco UCS B200 M2 Blade Server Ficha De Dados
Cisco UCS B460 M4 Blade Server (with Intel® Xeonl® E7 v4 CPU)
BASE SERVER STANDARD CAPABILITIES and FEATURES
5
BASE SERVER STANDARD CAPABILITIES and FEATURES
lists the capabilities and features of the base server. Details about how to configure the server for
a particular feature or capability (for example, number of processors, disk drives, or amount of memory)
are provided in
are provided in
.
Table 1 Capabilities and Features
Capability/Feature
Description
Chassis
The B460 M4 E7 v4 Blade Server mounts in a Cisco UCS 5100 series chassis
and occupies four chassis slots (each chassis slot is a half-width slot).
CPU
Four Intel® Xeon® E7-8800 v4 or E7-4800 v4 series processor family CPUs.
Chipset
Intel® C602J chipset
Memory
96 slots (48 per Blade Module) for registered DIMMs (RDIMMS) or
load-reduced DIMMs (LRDIMMs) . Maximum memory capacity is 6 TB. This is
accomplished with 96 64 GB DIMMs.
Expansion slots
Four dual-port slots and two quad-port mezzanine slot are provided that can
accommodate PCIe compatible adapters.
accommodate PCIe compatible adapters.
Two of the dual-port slots is dedicated for the VIC 1340 adapter, which
provides Ethernet and Fibre Channel over Ethernet (FCoE)
provides Ethernet and Fibre Channel over Ethernet (FCoE)
The other dual-port slot and the quad-port slot are used for various types of
Cisco adapters and Cisco UCS Storage Accelerator adapters. The VIC 1380 can
only be plugged into the quad-port slot.
Cisco adapters and Cisco UCS Storage Accelerator adapters. The VIC 1380 can
only be plugged into the quad-port slot.
Storage controller
Two LSI SAS3008 12G SAS RAID controllers, one in each Blade Module, each
providing 12 Gbps SAS connectivity as well as RAID 0, 1, and JBOD capability.
providing 12 Gbps SAS connectivity as well as RAID 0, 1, and JBOD capability.
Internal storage devices
■
Up to four optional front-accessible, hot-swappable solid state drives
(SSDs), two per Blade Module.
■
One optional USB flash drive, mounted inside the “Master” Blade
Module. Note that the USB flash drive in the “Slave” Blade Module is not
recognized.Only the USB flash drive in the “Master” Blade Module
(bottom Blade Module) is recognized.
recognized.Only the USB flash drive in the “Master” Blade Module
(bottom Blade Module) is recognized.
■
Dual sockets for optional Flexible Flash cards on the front left side of
the “Master” Blade Module. Note that the USB card slot in the “Slave”
Blade Module is not recognized. Only the USB card slot in the “Master”
Blade Module (bottom Blade Module) is recognized.
Blade Module is not recognized. Only the USB card slot in the “Master”
Blade Module (bottom Blade Module) is recognized.
NOTE: The Cisco VIC 1300 Series (1340 and 1380)
is compatible with the 6200 Series Fabric Interconnects.