Cisco Cisco Aironet 340 Ethernet Bridges Guia Do Utilizador
11 - 10 Aironet 340 Series Bridge
Adding A Filter (Add)
Use the add option to add a protocol filter and specify the type of action
required. There are several ways to add a filter:
required. There are several ways to add a filter:
n Predefined filter
n Manually add all the data
n Use an entry from the monitor table built by the unit
ÍTo Add a Predefined Filter
1.
Select the add option.
2.
Select one of the predefined strings: inet, novell, or netbios.
The inet filter adds filters for both the IP and ARP protocols.
The novell filter adds filters for all the types of allowed novell
protocol headers.
The novell filter adds filters for all the types of allowed novell
protocol headers.
3.
You will then be prompted for the action to take when the protocol is
encountered. Enter one of the actions described under the default
setting above, with the exception of “Off”.
setting above, with the exception of “Off”.
The following display shows the results if all predefined filters were
added.
added.
----------LLC---------
Name Action Protocol SAPs OUI Protocol
-------------- -------- -------- ---- ------ ---------
1. novell discard 8137
2. novell discard aaaa 000000 8137
3. novell discard ffff
4. novell discard e0e0
5. inet forward 0800
6. inet forward aaaa 000000 0800
7. inet forward 0806
8. inet forward aaaa 000000 0806
9. netbios forward f0f0