Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas
Interchassis Session Recovery
▀ Configuring Interchassis Session Recovery (ICSR)
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22982-01
Source context is the context where core network service is configured.
Configuring SRP Context for BGP
Use the following example to configure the BGP context and IP addresses in SRP context.
Notes:
Verifying BGP Configuration
Step 1
Verify your BGP configuration by entering the following command in Exec Mode:
Modifying the Destination Context for ICSR
To modify the destination context of core service:
Step 1
Add the Border Gateway Protocol (BGP) router and configure the HA IP address, neighbor IP address, remote IP
address in destination context, where the core network service is configured, by applying the example configuration in
the
address in destination context, where the core network service is configured, by applying the example configuration in
the
Step 2
Configure the service redundancy context with BGP neighbor context and IP address to monitor the BGP link activity
by applying the example configuration in the
by applying the example configuration in the
Step 3
Set the subscriber mode to default by following the steps in the
Step 4
Verify your BGP context configuration by following the steps in the
Step 5
Save your configuration as described in the Verifying and Saving Your Configuration chapter.