Cisco Cisco Packet Data Gateway (PDG) Guia De Resolução De Problemas

Página de 580
Subscriber Overcharging Protection   
▀  Overcharging Protection Configuration 
 
▄  Cisco ASR 5000 Series Enhanced Feature Configuration Guide 
OL-22983-01   
Overcharging Protection Configuration 
This section provides a high-level series of steps and the associated configuration examples for configuring the system 
with overcharging protection to subscriber on loss of radio coverage for UE in GGSN services. 
Important:
  This section provides the minimum instruction set to configure the system to avoid the overcharging 
due to loss of radio coverage at the GGSN in UMTS network. Commands that configure additional function for this 
feature are provided in the Command Line Interface Reference. 
These instructions assume that you have already configured the system-level configuration as described in System 
Administration Guide
 and specific product Administration Guide. 
To configure the system to support overcharging protection on LORC in GGSN service: 
Step 1 
Configure the GTPC private extension in a GGSN service by applying the example configurations presented in the 
GTP-C Private Extension Configuration section below. 
Step 2 
Save the changes to system configuration by applying the example configuration found in 
  
section of this chapter. 
Step 3 
Verify configuration of overcharging protection on LORC related parameters by applying the commands provided in 
th
  section of this chapter. 
 
GTP-C Private Extension Configuration 
This section provides the configuration example to configure the GTP-C private extensions for GGSN service: 
Notes: 
 
 is the name of the system context where specific GGSN service is configured. For 
more information, refer GGSN Service Administration Guide
 
 is name of the GGSN service where you want to enable the overcharging protection for 
subscribers due to LORC.