Руководство По Устранению Ошибки для Cisco Cisco Packet Data Gateway (PDG)
Subscriber Overcharging Protection
▀ Overcharging Protection Configuration
▄ Cisco ASR 5000 Series Enhanced Feature Configuration Guide
OL-22983-01
Overcharging Protection Configuration
This section provides a high-level series of steps and the associated configuration examples for configuring the system
with overcharging protection to subscriber on loss of radio coverage for UE in GGSN services.
with overcharging protection to subscriber on loss of radio coverage for UE in GGSN services.
Important:
This section provides the minimum instruction set to configure the system to avoid the overcharging
due to loss of radio coverage at the GGSN in UMTS network. Commands that configure additional function for this
feature are provided in the Command Line Interface Reference.
feature are provided in the Command Line Interface Reference.
These instructions assume that you have already configured the system-level configuration as described in System
Administration Guide and specific product Administration Guide.
Administration Guide and specific product Administration Guide.
To configure the system to support overcharging protection on LORC in GGSN service:
Step 1
Configure the GTPC private extension in a GGSN service by applying the example configurations presented in the
GTP-C Private Extension Configuration section below.
GTP-C Private Extension Configuration section below.
Step 2
section of this chapter.
Step 3
Verify configuration of overcharging protection on LORC related parameters by applying the commands provided in
the
the
GTP-C Private Extension Configuration
This section provides the configuration example to configure the GTP-C private extensions for GGSN service:
Notes:
is the name of the system context where specific GGSN service is configured. For
more information, refer GGSN Service Administration Guide.
is name of the GGSN service where you want to enable the overcharging protection for
subscribers due to LORC.