Cisco Cisco Unified Contact Center Enterprise 9.0(1) Guia Da Instalação

•

Example 1: Run "RegUtil -export c:\temp” on machine setcon.

In the above example, a file called RegUtil_setcon.dat will be created in C:\temp.

•

Example 2: Run "RegUtil -export" on machine setcon from directory c:\test.

In the above example, a file called RegUtil_setcon.dat will be created in C:\test.

Note: The target folder must have write access. Therefore, the install media on a DVD cannot
be selected.

Also, each time RegUtil is run with the export option, if there is already an existing
RegUtil_<hostname>.dat file, it will rename that file to RegUtil_<hostname>.dat.bak<number>.
So, in the above examples, it will create RegUtil_setcon.dat.bak1 if run a second time and
RegUtil_setcon.dat.bak2 if run a third time, and so on.

Technology Refresh example 1: production HDS/Administration & Data Server upgraded in parallel with the Central
Controller

In the first example, the production HDS/Administration & Data Server is upgraded in parallel
with the central controller. If necessary, a Unified ICM/Contact Center 9.0(1) temporary
HDS/Administration & Data Server is configured before the central controller upgrade
maintenance window to enable real-time reporting and configuration during the time that the
production HDS/Administration & Data Server is off-line.

None.

Upgrade the production
system to the required
baseline.

None.

1

No impact on the production
system.

Create the Active Directory
environment.

None.

2

No impact on the production
system.

Set up the new hardware.

None.

3

Required to enable configuration
and real-time reporting while the

Set up a temporary 9.0(1)
Administration & Data
Server.

1 hour

4

Administration & Data Server is
being upgraded.

************

************

************

************

Upgrade Guide for Cisco Unified ICM/Contact Center Enterprise & Hosted Release 9.0(1)