Aeg Electrolux esp4sl60cn Manual Do Utilizador
fee, to go back to making coffee using beans,
deactivate the pre-ground coffee function by
pressing the icon (B4) (fig. 8).
deactivate the pre-ground coffee function by
pressing the icon (B4) (fig. 8).
NOTE 1: Never introduce pre-ground coffee when
the machine is off or it could spread through the
inside of the appliance.
NOTE 2: Never add more than 1 measure, other-
wise the appliance will not make the coffee.
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coffee for
espresso coffee machines into the funnel.
NOTE 5: If more than one measure of pre-ground
coffee is used and the funnel clogs, push the cof-
fee down with a knife (fig. 21) then remove and
clean the brewing unit and machine as described
in the "Cleaning the brewing unit" section.
the machine is off or it could spread through the
inside of the appliance.
NOTE 2: Never add more than 1 measure, other-
wise the appliance will not make the coffee.
NOTE 3: Use the measure provided only.
NOTE 4: Introduce only pre-ground coffee for
espresso coffee machines into the funnel.
NOTE 5: If more than one measure of pre-ground
coffee is used and the funnel clogs, push the cof-
fee down with a knife (fig. 21) then remove and
clean the brewing unit and machine as described
in the "Cleaning the brewing unit" section.
DELIVERING HOT WATER
•
Always make sure the appliance is ready.
•
Make sure the water spout is in place and at-
tached to the nozzle (fig. 6).
tached to the nozzle (fig. 6).
•
Position a container under the spout.
•
Press the icon (B13) (fig. 20).
The appliance displays: "HOT WATER PRESS
OK".
Press the OK icon (B9) again and hot water is
delivered from the water spout into the con-
tainer underneath.
You should not deliver hot water for more
than 2 minutes at a time.
To interrupt, press the icon (B13) or the
ESC icon (B6).
The appliance stops delivery once the set
quantity is reached.
The appliance displays: "HOT WATER PRESS
OK".
Press the OK icon (B9) again and hot water is
delivered from the water spout into the con-
tainer underneath.
You should not deliver hot water for more
than 2 minutes at a time.
To interrupt, press the icon (B13) or the
ESC icon (B6).
The appliance stops delivery once the set
quantity is reached.
CHANGING THE QUANTITY
OF HOT WATER
OF HOT WATER
The machine is set by default to automatically de-
livery 150 ml of hot water.
To change these quantities, proceed as follows:
•
livery 150 ml of hot water.
To change these quantities, proceed as follows:
•
Place a container underneath the water spout
(fig. 5).
(fig. 5).
•
Press the icon (B2) to enter the menu
(fig. 15) or press the icons (B7) and
(fig. 15) or press the icons (B7) and
(B8) (fig. 2) until "PROGRAM HOT WATER"
is displayed.
is displayed.
•
Press the OK icon (B9) to confirm.
•
Select the required quantity of water by pres-
sing the icons (B7) and (B8).
The progress bar shows the quantity of water
selected.
sing the icons (B7) and (B8).
The progress bar shows the quantity of water
selected.
•
Press the OK icon (B9) to confirm (or the
ESC icon (B6) to cancel the operation.
ESC icon (B6) to cancel the operation.
•
Press the ESC icon (B6) (fig. 18) twice to exit
the menu.
the menu.
•
The appliance is now reprogrammed with the
new settings and is ready.
new settings and is ready.
MAKING CAPPUCCINO
N.B.:
Set the quantity of coffee you want
to use to make the cappuccino in the "Program
cappuccino" function in the menu.
cappuccino" function in the menu.
•
Select the taste of the coffee you want to use
to make the cappuccino by pressing the
icon (B4).
to make the cappuccino by pressing the
icon (B4).
•
Remove the lid of the milk container.
•
Fill the container with about 100 grams of
milk for each cappuccino to be prepared (fig.
23). Never exceed the MAX level (correspon-
ding to about 750 ml) marked on the contai-
ner.
You should ideally use skimmed or semi-
skimmed milk at refrigerator temperature
(about 5°C).
milk for each cappuccino to be prepared (fig.
23). Never exceed the MAX level (correspon-
ding to about 750 ml) marked on the contai-
ner.
You should ideally use skimmed or semi-
skimmed milk at refrigerator temperature
(about 5°C).
•
Make sure the intake tube is correctly inser-
ted in the rubber washer (fig. 24) then re-
place the milk container lid.
ted in the rubber washer (fig. 24) then re-
place the milk container lid.
•
Position the frothed milk regulator (C1) bet-
ween the words CAPPUCCINO and CAFFE-
LATTE printed on the milk container lid.
The quantity of froth can be adjusted by mo-
ving the regulator towards the word CAFFE-
LATTE for a denser froth. Moving it towards
the word CAPPUCCINO obtains a less dense
froth.
ween the words CAPPUCCINO and CAFFE-
LATTE printed on the milk container lid.
The quantity of froth can be adjusted by mo-
ving the regulator towards the word CAFFE-
LATTE for a denser froth. Moving it towards
the word CAPPUCCINO obtains a less dense
froth.
16
GB