Aeg Electrolux esp4sl60cn Manual Do Utilizador
•
Press the OK icon (B9) again.
•
Select the quantity of coffee required by pres-
sing the icons (B7) and (B8).
The progress bar shows the quantity of cof-
fee selected.
sing the icons (B7) and (B8).
The progress bar shows the quantity of cof-
fee selected.
• Press the OK icon (B9) to confirm (or the
ESC icon (B6) to cancel the operation.
•
Press the ESC icon (B6) (fig. 18) twice to exit
the menu.
the menu.
MAKING A NUMBER OF
CUPS OF COFFEE WITH THE
JUG FUNCTION (if provided)
CUPS OF COFFEE WITH THE
JUG FUNCTION (if provided)
Some models are fitted with a jug. Using this fun-
ction you can automatically make a number of
cups of coffee (4, 6) directly in the jug (A11) to
keep the coffee hot.
•
ction you can automatically make a number of
cups of coffee (4, 6) directly in the jug (A11) to
keep the coffee hot.
•
Turn the jug lid until the arrow lines up with
the word OPEN and remove the lid.
Rinse the jug and lid.
the word OPEN and remove the lid.
Rinse the jug and lid.
•
Close the jug by turning the lid towards
CLOSE until it is tightly closed and then place
it under the coffee spout.
Always position the jug with the handle fa-
cing to the right or left as shown in the figure.
CLOSE until it is tightly closed and then place
it under the coffee spout.
Always position the jug with the handle fa-
cing to the right or left as shown in the figure.
The coffee spout (A13) must be fully raised
to enable the jug to be inserted.
"FILL BEAN CONT. AND WATER TANK,
EMPTY WASTE CONT., PRESS OK" is displa-
yed. Make sure the water tank is full, the bean
container is full enough and the waste coffee
container is completely empty.
to enable the jug to be inserted.
"FILL BEAN CONT. AND WATER TANK,
EMPTY WASTE CONT., PRESS OK" is displa-
yed. Make sure the water tank is full, the bean
container is full enough and the waste coffee
container is completely empty.
•
Press the OK icon (B9).
The type of coffee selected, for example
"EXTRA-MILD JUG", and the number of cups
you want to make with the jug are displayed,
for example "JUG 4 CUPS".
The type of coffee selected, for example
"EXTRA-MILD JUG", and the number of cups
you want to make with the jug are displayed,
for example "JUG 4 CUPS".
•
Confirm by pressing the icon (if provi-
ded).
The display shows a progress bar which in-
dicates coffee making process.
When the progress bar is complete, the ap-
pliance finishes the process and automati-
cally goes back to the coffee jug function.
If on the other hand an incomplete progress
bar is displayed, this means that the cycle
has not been completed correctly. Remove
the jug and check the message which appe-
ars on the display, consulting the section "DI-
SPLAYED MESSAGES".
ded).
The display shows a progress bar which in-
dicates coffee making process.
When the progress bar is complete, the ap-
pliance finishes the process and automati-
cally goes back to the coffee jug function.
If on the other hand an incomplete progress
bar is displayed, this means that the cycle
has not been completed correctly. Remove
the jug and check the message which appe-
ars on the display, consulting the section "DI-
SPLAYED MESSAGES".
•
Remove jug and leave the lid in the CLOSE
position to keep the coffee hot.
position to keep the coffee hot.
•
To pour the coffee, turn the lid anticlockwise
until the arrow is lined up with the spout of
the jug.
until the arrow is lined up with the spout of
the jug.
Important!
When the coffee beans are in-
sufficient to complete the required function, the
appliance stops the process and waits for the
bean container to be filled again and the icon
(if provided) to be pressed. For example, when
you want to make 4 cups of coffee but the beans
are insufficient, the appliance makes 2 cups then
stops making coffee. Fill the bean container and
press the icon (if provided). Once the con-
tainer has been filled, the appliance makes the 2
remaining cups only to reach the required num-
ber of 4 cups. If there is not enough water in the
tank to complete the required function or the
waste coffee container is full, the appliance in-
terrupts the process. To fill the water tank or
empty the waste coffee container, you must re-
move the jug. This interrupts the programme.
After rectifying the problem, the programme
must be started again. In this case, you must take
the amount of coffee already delivered into ac-
count to avoid the jug overflowing.
appliance stops the process and waits for the
bean container to be filled again and the icon
(if provided) to be pressed. For example, when
you want to make 4 cups of coffee but the beans
are insufficient, the appliance makes 2 cups then
stops making coffee. Fill the bean container and
press the icon (if provided). Once the con-
tainer has been filled, the appliance makes the 2
remaining cups only to reach the required num-
ber of 4 cups. If there is not enough water in the
tank to complete the required function or the
waste coffee container is full, the appliance in-
terrupts the process. To fill the water tank or
empty the waste coffee container, you must re-
move the jug. This interrupts the programme.
After rectifying the problem, the programme
must be started again. In this case, you must take
the amount of coffee already delivered into ac-
count to avoid the jug overflowing.
18
GB