Aeg Electrolux esp4sl60cn Manual Do Utilizador

Página de 32
17
Remove the hot water spout (fig 6) and at-
tach the milk container to the nozzle (fig. 25).
Position the milk spout as shown in fig. 26
and then place a sufficiently large cup under
the coffee and milk spouts.
Press the       icon (fig. B12). 
"CAPPUCCINO..." is displayed and after a few
seconds, frothed milk flows out of the milk
spout into the cup below. (Delivery stops au-
tomatically).
The appliance delivers coffee.
The cappuccino is now ready. Sweeten to
taste and, if desired, sprinkle the froth with a
little cocoa powder.
NOTE 1: While making cappuccino, the flow of
frothed milk or coffee can be interrupted by pres-
sing the       icon (B12).
NOTE 2: If the milk in the container finishes while
delivering frothed milk, remove the container and
add milk. Then re-attach it and press the        icon
(B12) to request cappuccino again. 
NOTE 3: To ensure the complete cleanliness and
hygiene of the milk frother, always clean the cir-
cuits in the milk container lid after making cap-
puccino. "PRESS CLEAN!" flashes on the display.
Place a recipient under the milk spout (fig.
26).
Press the CLEAN button on the lid (C3) and
hold down for at least 5 seconds (fig. 26) to
start the cleaning function. The appliance di-
splays the message "CLEANING" above a pro-
gressive bar.   
You should not release the CLEAN button
until the bar is complete indicating that clea-
ning is concluded.  
When the CLEAN button is released, the fun-
ction stops. 
After cleaning, remove the milk container and
place in the refrigerator.  The milk should not
be left out of the refrigerator for more than
15 minutes. 
NOTE 4: To change the quantity of coffee or fro-
thed milk the appliance delivers automatically
into the cup, proceed as described in the section
"Changing the quantity of coffee and milk for cap-
puccino". 
CHANGING THE QUANTITY
OF MILK AND COFFEE FOR
CAPPUCCINO
The appliance is set by default to automatically
deliver a standard cappuccino. 
To change these quantities, proceed as follows:
Changing the quantity of milk
Fill the container with milk up to the maxi-
mum level indicated on the container.
Press the        icon (B2) to enter the menu
(fig. 15), then press the              icons (B7)
and (B8) (fig. 2) until "PROGRAM CAPPUC-
CINO" is displayed. 
• 
Press the OK icon (B9) to confirm. 
"PROGRAM MILK" is displayed.
• 
Press the OK icon (B9) again.
• 
Select the quantity of milk required by pres-
sing the            icons (B7) and (B8).  
The progress bar shows the quantity of milk
selected. 
•  Press the OK icon (B9) to confirm (or the
ESC icon (B6) to cancel the operation).
• 
Press the ESC icon (B6) (fig. 18) twice to exit
the menu.
Changing the quantity of coffee
Press the         icon (B2) to enter the menu
(fig. 15) or press the          icons (B7) and
(B8) (fig. 2) until "PROGRAM CAPPUCCINO"
is displayed. 
• 
Press the OK icon (B9) to confirm then the 
icons (B7) and (B8) (fig. 2) until
"COFFEE FOR CAPPUCC." is displayed.
GB
"Less dense" froth 
NO froth
"Denser" froth 
frothed milk 
regulator