HP ml310 Manual Do Utilizador

 

Introduction ..................................................................................................................................

 

 

For a complete listing of error messages, refer to the POST error messages in the 
HP ProLiant Servers Troubleshooting Guide located on the Documentation CD 
or on the HP website (

  WARNING:  To avoid potential problems, ALWAYS read the 

warnings and cautionary information in the server documentation 
before removing, replacing, reseating, or modifying system 
components. 

 

If the current version of the ROM is corrupt, perform ROMPaq disaster recovery 
procedures: 

1.

  Create a ROMPaq diskette using the Autorun Menu on the SmartStart CD. 

2.

  Power down the server ("Powering down the server" on page 

3.

  Insert the ROMPaq diskette. 

4.

  Power up the server ("Powering up the server" on page 

a.

  The server generates one long beep and two short beeps to indicate that 

you are in disaster recovery mode. If the diskette is not in place, the 
system continues to beep until a valid ROMPaq diskette is inserted.  

b.

  The ROMPaq diskette flashes the system ROM image. If successful, a 

sequence of ascending audible beeps is generated. If unsuccessful, a 
sequence of descending audible beeps is generated and you need to 
repeat the disaster recovery process. 

5.

  Power down the server ("Powering down the server" on page 

6.

  Remove the ROMPaq diskette.