HP procurve 530 Manual Do Utilizador

3-7

5.

To enable radio 1 for the access point, type 

exit to return to the configu-

ration mode for radio 1, then type 

enable to enable the radio.

6.

To configure the access point’s radio 2 interface, type 

radio 2 and repeat 

steps 1 to 4. Note that when the radio 2 interface mode is set to 802.11a, 
the available channels are 36 to 165, depending on the country setting.

7.

To save all configuration settings from the running configuration file to 
the startup configuration file, type 

write memory from any command level. 

ProCurve Access Point 530(radio1-wlan1)# exit
ProCurve Access Point 530(radio1)# enable
ProCurve Access Point 530(radio1)#

ProCurve Access Point 530(radio1-wlan1)# write memory
ProCurve Access Point 530(radio1-wlan1)#