HP procurve 530 Manual Do Utilizador
3-8
Getting Started With Access Point Configuration
Ge
tti
ng S
ta
rte
d Wi
th
Ac
cess
Po
int
Con
fig
ura
tio
n
Here is some information on the basic IP address and wireless configuration
parameters. For more information on these parameters, see the Management
and Configuration Guide
parameters. For more information on these parameters, see the Management
and Configuration Guide
.
Parameter
Default
Username
admin
The name of the manager.
Password
admin
The password for the manager.
IP Address
192.168.1.10
IP address compatible with your network.
Subnet Mask
255.255.255.0
Subnet mask compatible with your network.
Default Gateway
not set
IP address of the next-hop gateway node for network traffic that needs to
be able to reach off-subnet destinations.
be able to reach off-subnet destinations.
Radio 1 Mode
802.11g
The operating mode for Radio 1.
Radio 2 Mode
802.11a
The operating mode for Radio 2.
SSID
Radio 1 - SSID 1
Radio 2 - SSID 2
Radio 2 - SSID 2
The Service Set Identifier (SSID) for the access point interface, which is
broadcast in the beacon frames.
broadcast in the beacon frames.
Channel Policy
Auto
The radio channel through which an access point radio communicates
with its wireless stations. When attempting to connect, most wireless
stations automatically set their radio channel to the same channel used
by the access point.
with its wireless stations. When attempting to connect, most wireless
stations automatically set their radio channel to the same channel used
by the access point.
Wireless Operation
Enabled
Wireless operation is automatically enabled after you have set the country
code.
code.
Note: The IP address and subnet mask assigned for the access point must be compatible with the IP addressing used
in your network. For more information on IP addressing, see the Management and Configuration Guide.
in your network. For more information on IP addressing, see the Management and Configuration Guide.