HP procurve 530 Manual Do Utilizador

3-9

Where to Go From Here

The above procedure, using the CLI, configured your access point with a 
Manager password, IP address, and subnet mask. As a result, with the proper 
network connections, you can now manage the access point from a PC 
equipped with Telnet or a Secure Shell client, or a Web browser interface. The 
above procedure also configured the primary Service Set Identifier (SSID), 
the radio channel, and enabled wireless operation. Your wireless stations can 
now access the network by setting their SSID and radio channel to the same 
values used by the access point. Note that some wireless stations can be 
configured to scan all of the radio channels for an access point and the SSID.

Some basic information on managing your access point is included in the next 
section. For more information on the console and Web browser interfaces, 
and all the features that can be configured on the Access Point 530, please see 
the Management and Configuration Guide.

If you cannot start a con-

sole session because of a lost manager password, you can reset the password 
to the factory default by getting physical access to the access point and 
pressing and holding the Clear button for more than one second.