BMW x5 2000 Manual Do Utilizador

Index

Data

Technology

Repairs

Car care

Controls

Overview

Check Control

Graphic display

The following alerts or status messages
are displayed with icons from ignition
key position 2 and up until the defects
are corrected:

1 Check low beams.

2 Add washer fluid (goes out after ap-

prox. 1 minute).

3 Door open.

4 Tailgate open.

5 Check brake and tail lamps.

A defective center brake lamp is indi-
cated by the upper symbol.

When you open the door after stopping,
a warning signal sounds without a vi-
sual indicator for:

LIGHTS ON and

KEY IN IGNITION LOCK.

390de121

Alphanumeric display

Text messages are used to alert the
driver to system malfunctions when the
ignition key is turned to position 2. The
alert is accompanied by a gong.

1 Status report symbol

2 Display

3 CHECK button

Messages concerning system faults are
differentiated based on two priorities:

390us111

Priority 1

These defects are immediately indi-
cated by a gong and a flashing warning
symbol 1. Simultaneous defects will be
displayed consecutively. These status
messages remain in the display until the
defects are corrected. They cannot be
deleted by pressing the CHECK
button 3:

RELEASE PARKINGBRAKE

COOLANT TEMPERATURE
The coolant is overheated. Stop the
vehicle immediately and switch off
the engine. Refer to pages

and

140

STOP! ENGINE OILPRESS
The oil pressure is too low. Stop the
vehicle immediately and switch off
the engine. Refer to page