BMW x5 2000 Manual Do Utilizador

Index

Data

Technology

Repairs

Car care

Controls

Overview

Check Control

TRANS. FAILSAFE PROG
Please consult the nearest authorized
BMW center. Refer to page

CHECK BRAKE LININGS
Have the brake linings inspected by
your BMW center. Refer to page

123

CHECK COOLANT LEVEL
Coolant too low, top up at the next
opportunity. Refer to page

140

ENGINE FAILSAFE PROG
There is a fault in the engine's elec-
tronic control system. When braking,
higher brake application pressure
may be necessary and brake pedal
travel may be significantly longer.
Have the fault checked by your
authorized BMW center.

Displays after completion of trip

All of the malfunctions registered during
the trip appear consecutively when the
key is turned to position 0.

The following displays will appear when
appropriate:

LIGHTS ON

KEY IN IGNITION LOCK

CHECK ENGINE OIL LEV
Add engine oil at the next opportunity
(next stop for fuel). Refer to
page

137

These displays appear when you open
the driver's door after parking the vehi-
cle. A supplementary gong is also
heard.

Status reports remain available for a
period of approx. three minutes after
the display goes out and the key is
removed from the ignition. Press the
CHECK button 3. If there were multiple
reports, press the CHECK button re-
peatedly to view them all in sequence.

To check the Check Control

Press the CHECK button 3 with the
ignition key in position 2: CHECK
CONTROL OK appears in the display.

No malfunctions are present in the
monitored systems.

Onboard computer

You will find a description of the
onboard computer in the Owner's
Manual for the Radio and Information
System or the Owner's Manual for the
onboard monitor.

You can have the Check Control
and onboard computer messages

displayed in a different language.