Yamaha bd-s2900 Manual Do Utilizador
GETTING STARTED
8
En
1 STANDBY/ON button (] 8)
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
standby mode, the unit is still consuming a small amount of power.
2 Disc tray (] 9)
3 Display
3 Display
The indicator blinks when reading data from a disc or card.
4 SD Card LED
• It is possible to set the LED to turn on/off. (
] 20, SD Card
LED Control)
5 SD card slot (] 9)
6 Remote control signal sensor (] 1)
7 Open or close the disc tray (] 9)
8 Search/Slow-motion/Skip (] 10)
7 Open or close the disc tray (] 9)
8 Search/Slow-motion/Skip (] 10)
Search:
Press and hold (During play)
Slow-motion: Press and hold (During pause)
Skip:
Skip:
Press
Rear panel terminals (
After connecting your new player and pressing the standby/on button, a screen for the basic settings will appear.
Disc indicator
SD card indicator
EASY SETTING
Preparation
Turn on the television and select the appropriate video input on the television.
Turn on the television and select the appropriate video input on the television.
1
Press [
STANDBY/ON].
➜ Setup screen appears.
2
Follow the on-screen instructions and make the settings with
[
[
,
] and [OK].
➜ “On-screen Language” and “TV Aspect” (] 20) are set.
• You can perform this setup anytime by
selecting “Easy Setting” in the Setup
menu. (
menu. (
• You can also change these settings
individually. (
] 18)
• If this unit is connected to a Panasonic TV
(VIERA) supporting HDAVI Control 2 via
an HDMI cable, then the “On-screen
Language” and “TV Aspect” setting
information on the TV are captured from
the TV.
an HDMI cable, then the “On-screen
Language” and “TV Aspect” setting
information on the TV are captured from
the TV.
Tips