Escalade Sports 2l-6540-00 Manual Do Utilizador

5. Before starting this part of the assembly, orient

beam #4 with ball return attachment holes at the

same end of the table and the holes marked by

arrows in figure 3 facing up.

6. Attach wooden beams #4 to the leg assemblies (that

you just put together). Use two long bolts #27, two

short bolts #40, six washers #23 and four locknuts

#26 as shown.

NOTE: The two longer bolts #27 go through top

and bottom mounting holes in beam #4, metal

facade #1 and leg post #3. These bolts require a

washer between the bolt and beam #4 as well as

between leg post #3 and the locknut.

NOTE: The two shorter bolts #40 go through the

other two mounting holes in beam #4 and metal

facade #1. They only require a washer between the

bolt and beam #4.

4

These holes are for ball return
attachment.  Be sure both
beams #4 have these holes
at same end of table

These holes are for ball return
attachment.  Be sure both
beams #4 have these holes
at same end of table

4

4

27

40

All Washers
#23

#23

All locknuts
#26

4

1

Holes marked by arrows

be on the

when

attached to the legs!

Holes marked by arrows

be on the

when

attached to the legs!

3